CCNP ROUTING & SWITCHING

Cisco Certified Network Professional (CCNP) Routing and Switching is an ideal certification program for network engineers to maximize their foundational networking knowledge. Our training module imparts participants with practical, relevant and industry-ready domain knowledge on network solutions.
The course validates participants the following skills at the end of the training:
- Ability to design, apply, authenticate and troubleshoot local and wide-area enterprise networks.
- Coordinate collaboratively with network specialists on advanced security, voice, wireless and video solutions.

Network & Network Security
Technologies 

COURSE OUTLINE

CCNP Route - Implementing Cisco IP Routing (ROUTE) 2.0

The knowledge and skills that a learner must have before attending this Curriculum are as follows:
• Describing network fundamentals
• Establishing Internet and WAN connectivity (IPv4 and IPv6)
• Managing network device security
• Operating a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
• Troubleshooting IP connectivity (IPv4 and IPv6)
• Configuring and troubleshooting EIGRP and OSPF (IPv4 and IPv6)
• Configuring devices for SNMP, Syslog, and NetFlow access
• Managing Cisco device configurations, Cisco IOS images, and licenses


It is highly recommended that this course be taken after the following Cisco courses:
• Interconnecting Cisco Networking Devices v2.0, Part 1 (ICND1 v2.0) and Part 2 (ICND2 v2.0)
• Interconnecting Cisco Networking Devices: Accelerated version 2.0 (CCNAX v2.0)  

ROUTE v2.0 includes major updates and follows an updated blueprint. However, note that this course does not cover all items listed on the blueprint. Some older topics have been removed or simplified, while several new IPv6 routing topics have been added. Course content has been adapted to Cisco IOS Software Release 15 and technically updated. Course also introduces new type of labs, called discovery labs. Discovery labs are instructor guided lab through which student explores new topics in an interactive way. All labs are developed only as virtual labs. To get the full course experience, you should cover everything, including Introduction, Discovery labs, Summary, and Module Self-Check.  

Upon completing this course, the learner will be able to meet these overall objectives:
Describe routing protocols, different remote connectivity options and their impact on routing and implement RIPng
Configure EIGRP in IPv4 and IPv6 environment
Configure OSPF in IPv4 and IPv6 environment
Implement route redistribution using filtering mechanisms
Implement path control using policy based routing and IP SLA
Implement enterprise Internet connectivity
Secure Cisco routers according to best practices and configure authentication for routing protocols 

Module 1: Basic Network and Routing Concepts
Module 2: EIGRP Implementation
Module 3: OSPF Implementation
Module 4: Configuration of Redistribution
Module 5: Path Control Implementation
Module 6: Enterprise Internet Connectivity
Module 7: Routers and Routing Protocol Hardening 

CCNP Switch - Implementing Cisco IP Switched Networks (SWITCH) 2.0

The knowledge and skills that a learner must have before attending this Curriculum are as follows:
• Describing network fundamentals
• Establishing Internet and WAN connectivity (IPv4 and IPv6)
• Managing network device security
• Operating a medium-sized LAN with multiple switches, supporting VLANs, trunking, and spanning tree
• Troubleshooting IP connectivity (IPv4 and IPv6)
• Configuring and troubleshooting EIGRP and OSPF (IPv4 and IPv6)
• Configuring devices for SNMP, Syslog, and NetFlow access
• Managing Cisco device configurations, Cisco IOS images, and licenses


It is highly recommended that this course be taken after the following Cisco courses:
• Interconnecting Cisco Networking Devices v2.0, Part 1 (ICND1 v2.0) and Part 2 (ICND2 v2.0)
• Interconnecting Cisco Networking Devices: Accelerated version 2.0 (CCNAX v2.0) 

SWITCH v2.0, 5 day ILT, includes major updates and follows an updated blueprint. However, note that this course does not cover all items listed on the blueprint. Some older topics have been removed or simplified, while several new IPv6 routing topics have been added. Course content has been adapted to Cisco IOS Software Release 15 and technically updated. Course also introduces new type of labs, called discovery labs. Discovery labs are instructor guided lab through which student explores new topics in an interactive way. All labs are developed only as virtual labs. To get the full course experience, you should cover everything, including Introduction, Discovery labs, Summary, and Module Self-Check.

Upon completing this course, the learner will be able to meet these overall objectives:
Describe the hierarchical campus structure, basic switch operation, use of SDM templates, PoE, and LLDP
Implement VLANs, trunks, explain VTP, implement DHCP in IPv4 and IPv6 environment, and configure port aggregation
Implement and optimize STP mechanism that best suits your network - PVSTP+, RPVSTP+, or MSTP
Configure routing on a multilayer switch
Configure NTP, SNMP, IP SLA, port mirroring, and verify StackWise and VSS operation
Implement First Hop redundancy in IPv4 and IPv6 environments
Secure campus network according to recommended practices 

Module 1: Basic Concepts and Network Design
Module 2: Campus Network Architecture
Module 3: Spanning Tree Implementation
Module 4: Configuring Inter-VLAN Routing
Module 5: Implementing High Availability Networks
Module 6: First Hop Redundancy Implementation
Module 7: Campus Network Security 

CCNP Tshoot - Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) 2.0

Prior to attending this course students should have the knowledge of and experience with the implementation and verification of enterprise routing and switching technologies as offered by the Implementing Cisco Switched Networks (SWITCH) v2.0 and Implementing Cisco IP Routing (ROUTE) v2.0 courses or equivalent skills and knowledge. This includes knowledge and experience of the following technologies:
• Layer 2 switching
• VLANs, VLAN access control lists, port security
• Switch security issues
• Link aggregation protocols
• Spanning Tree Protocol (STP)
• Inter-VLAN routing solutions
• First Hop Redundancy Protocols (FHRPs) - HSRP, VRRP, and GLBP
• Branch office operations
• Enhanced Interior Gateway Routing Protocol (EIGRP)
• Open Shortest Path First (OSPF)
• Layer 3 path control
• Redistribution
• Internal and External Border Gateway Protocol (BGP)
• IPv6 Networking 

TSHOOT v2.0, 5 day ILT, includes major updates and follows an updated blueprint. However, note that this course does not cover all items listed on the blueprint. Some older topics have been removed or simplified, while several new IPv6 routing topics have been added. Course content has been adapted to Cisco IOS Software Release 15 and technically updated. Course also introduces new type of labs, called discovery labs. Discovery labs are instructor guided lab through which student explores new topics in an interactive way. All labs are developed only as virtual labs. To get the full course experience, you should cover everything, including Introduction, Discovery labs, Summary, and Module Self-Check.

Upon completing this course, the learner will be able to meet these overall objectives:
Describe the troubleshooting tools and methodologies that are used to identify and resolve issues in complex enterprise networks
Isolate and fix the network issues that your company, SECHNIK Networking Ltd., is facing
Isolate and fix the network issues that your customer, TINC Garbage Disposal Ltd., is facing
Isolate and fix the network issues that your customer, PILE Forensic Accounting Ltd., is facing
Isolate and fix the network issues that your customer, Bank of POLONA Ltd., is facing
Isolate and fix the network issues that your customer, RADULKO Transport Ltd., is facing 

Module 1: Tools and Methodologies of Troubleshooting
Module 2: Troubleshooting at SECHNIK Networking Ltd
Module 3: Troubleshooting at TINC Garbage Disposal Ltd.
Module 4: Troubleshooting at PILE Forensic Accounting Ltd
Module 5: Troubleshooting at Bank of POLONA Ltd
Module 6: Troubleshooting at RADULKO Transport Ltd  

Anything to ask?

If you have any question about training, fees, courses or anything else, feel free to ask us anytime!


Address

Nexperts Academy Sdn Bhd,
Unit 313, Block E, Phileo Damansara 1, Jalan 16/11 off Jalan Damansara 46350, PJ Selangor, Malaysia

Working Hours

Monday Tuesday Wednesday Thursday Friday

09:00 - 17:30 09:00 - 17:30 09:00 - 17:30 09:00 - 17:30 09:00 - 17:30

Contact

Email: vaheed@nexpertsacademy.com
Phone: +6 011 1221 6872
Office: +6 03 7931 8872